+ Reply to Thread
Results 1 to 2 of 2

Thread: New to the group-Need suggestion to analyse the data

  1. #1
    Points: 11, Level: 1
    Level completed: 21%, Points required for next Level: 39

    Thanked 0 Times in 0 Posts

    New to the group-Need suggestion to analyse the data

    I have a database:
    Interstate ADT(avg daily traffic) IRL 1yrRL 2ndyrRL...5thyrRL
    I-95 15000-25000 (800) (750) (650) (340)

    I-95 is a highway where average daily traffic is from 15000-25000. The roadmarking or roadsign that were put initially to guide the car/driver at nighttime had IRL(initial retro reflective number) of 800 and the material was polyurea. It can be thermo or paint also. Then an instrument is used and the reading of the roadmarking taken a year later and found 750 and then the later years 650,340...and son on may be upto 7th year.

    I developed an exponential degradation model from the database but does not look satisfactory to my BOSS.

    Now my goal is to find the cost effectiveness of these materials.

    Is there any otherway you can suggest or advice me..

    Thank you once again.


  2. #2
    Fortran must die
    Points: 58,790, Level: 100
    Level completed: 0%, Points required for next Level: 0
    noetsi's Avatar
    Thanked 915 Times in 874 Posts

    Re: New to the group-Need suggestion to analyse the data

    I am not sure what your DV is. Reduction in some material over time? Also why did the model you develop not meet your bosses satisfaction?

    If you had more than seven data points you could try regression with AR or ARMA error. You might try that anyhow and see how it works. Time would be your predictor.
    "Very few theories have been abandoned because they were found to be invalid on the basis of empirical evidence...." Spanos, 1995

+ Reply to Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Advertise on Talk Stats