+ Reply to Thread
Results 1 to 1 of 1

Thread: Probability of solder ball inside a sealed package able to cause a failure

  1. #1
    Points: 4,926, Level: 44
    Level completed: 88%, Points required for next Level: 24

    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Probability of solder ball inside a sealed package able to cause a failure




    I have a hermetically sealed semiconductor package, NAND. And I have some foreign object debris (FOD), solder balls to be exact, inside this device. It is a device that failed visual x-ray inspection and is now inside a system. I am trying to figure out the probability of that solder ball able to touch the leads (leads on all 4 sides of the package) and either short the device or cause loss of signal/data or data corruption.

    This is what I am taking into account so far, any help will be greatly appreciated.

    Calculating a P (short/loss of signal).
    • Determine the volume/package and # leads/package.
    • Determine overall size/volume of FOD.
    • -Assumption is that all FODs are same size or larger than the lead spacing, so every FOD is able to touch 2 leads at a time, and package would be susceptible to failure.
    • # of critical leads per package would need to be determined.
    • -Also possible that shorts (2+ lead contact) can be only caused on powered/critical leads where violation of lead contacts elsewhere may cause loss of signal/data.
    • Probability of the solder ball moving inside the package is 1.


      Anything else that I should take into account? Any other ideas?
    Last edited by ChootarLaal; 06-05-2015 at 08:19 AM.

+ Reply to Thread

           




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts






Advertise on Talk Stats