+ Reply to Thread
Results 1 to 2 of 2

Thread: Gage R&R results to usable data

  1. #1
    Points: 5, Level: 1
    Level completed: 9%, Points required for next Level: 45

    Thanked 0 Times in 0 Posts

    Question Gage R&R results to usable data

    This is for my thesis & i'm stumped. Please help.
    A Gage R&R was done comparing two inspection tools to each other. These tools measure the section modulus of wood, which is used to calculate the SI and whether or not we replace the wood.

    The measurements using the tools were normalize, that is, divided by the actual value. I have the mean and stdev of each normalized tool from a sample of 15 poles measured 6 times.

    How do i use these values to say that Tool A and B, given the precision (using results from the case study) will be able to pick up X amount of poles before failure ( a normalized value less than 1).

    Mean_A = 0.79 Stdev A = 0.25 for example. I can get the probability the normalized value but how do i apply that to the actual number of failures in a network.

  2. #2
    TS Contributor
    Points: 12,287, Level: 72
    Level completed: 60%, Points required for next Level: 163
    rogojel's Avatar
    I work in Europe, live in Hungary
    Thanked 332 Times in 312 Posts

    Re: Gage R&R results to usable data

    from the Gage R&R study you should be able to get the measurement variation (that is, the variation due to measurement error) . This is what you would need to answer your question.


+ Reply to Thread


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Advertise on Talk Stats